Hy my name is Ergin.
I come from Germany. Went through the manual of DR_EVIL assembled my Megasquirt.
Have Tested everything with JimStim and it works.
Today I have it installed in my Punto GT3.
Unfortunately, I have not brought it to start.
It sounds as if it would start. I tried the set on cranking PW.
Engine Specs
Running MS1 Extra
1372cc GT3 Standard Rods, Pistons, Crank, Block
Standartd Punto GT Injectors (226 @ 3Bar)
63,5mm Downpipe and exhaust
Mitsu Turbo
Standard Punto GT3 compression ratio
Are these setting, at tuner studio, correct?
Mainly the red marked.
Thanks and Sorry for my English,
Ergin