I use your external wiring Pete. Its Pin 47GT to Pin 2MS crank sensor ground and Pin 48GT to pin 24MS its signal wire. thats right? I have jumper from TSEL to VROUT
rotational speed I still fall to zero even if the car is running. I tried to adjust the resistors R52 and 56 but no change.
I tried various maps of the fuel and ignition. but once I open up the throttle and the car is not up to speed at all.
ok I add fuel on idle. but this does not solve my problem.
I dont have a MAPDADDY but only a MAPX4250AP.
but my tooth logger looks like this:
http://imageshack.us/photo/my-images...oothloger.png/