Here is the link to the assembly manual
http://www.megamanual.com/ms2/V3assemble.htm
Follow this carefully and there isn't much that can go wrong, also there is lots of forum help available if it does.
Heres the kit laid out, everything is labled neatly and packed in bags, The pink bags are static sensitive so ground yourself before taking any component out of them.
I suggest you print out the componant map, it will come in useful
Step 1
First I soldered on the connectors
Then the power supply components
When you get to step 19, Personally I installed pins here on the boot header as we need to load the processer with ms1 extra code later on. (I added this picture so ignore all the new bits)
This took an hour or so, then I hooked up the stimulator to supply 12 volts and tested the voltages at pins on the processer socket to make sure that the power supply circuits were functioning (Step 23).
All checked out and awaiting more building.