Stripping the Gearbox
Searching the intenet for bearings for this box wasnt very sucessfull
Only 2 Places would even come up for parts
Transmission-rebuild-kits
and another which was far to expensive.
Looking through the site i noticed two different sets for the vivaro PK6 Gearbox.
This is due to the face that some Models PK6 -375 as opposed t the PK6 - 075 have plastic cages in the bearings instead of metal,
And this also proved to be an extra £100 on the price.
So Having found the cost of the parts i would need to rebuild it we set about taking the gearbox to peices.
And as their was no damage to syncros or gears it would be cost effective to repair and replace the bearings
Some of the bearing Races were solid. The bearing race pullers we had wernt capable of pulling thm out so we had to improvise again.
We had some small metal discs made up at the loca machine shop and then threaded down the middle.
We then welded them to the inside of the bearing race and actually screwed them out using the a silly contraption which was so much easier . lol