if the gauges are the same style i will have both £25 delivered howmuh for the dump valve aswell
Hi guys up for grabs from the GT today are:-
Forge FMDV Twin Piston Dump Valve in Red with Bung (New Springs Upper/Lower recently fitted) £40
Slight rubbing marks on casing see pic.
SEB 2 for a GT3 ECU £55 delivered SOLD
Nomad Dark Gray Dual 52mm A Pillar Pod £35 DeliveredSOLD
Red Samco Boost Pipe with D/V Outlet £45 Delivered SOLD
HDI EBC-D Hi/Low Settings, Trick bit of kit i used an O/E PBV to control the boost
which is included in the sale along with full hand written wiring instructions! Its simple.
£75 DeliveredSOLD
Red Lockwood Speedo unit (casing cracked as i bought it! just use your own of your dials) £30 Delivered
Plasma Boost Gauge 52mm (Matches Plasma Dial Colours) hand wrtitten wiring instructions. £15 deliveredSOLD
Lit up at night!
Plasma AFR Gauge (wire to black wire off lamda sensor in 4 way plug on top of AFM), hand written wiring instructions £15 deliveredSOLD
Lit up!
Filter with all the extras (only 1500 miles old) SOLD
Lifters £15 SOLD
Last edited by Barry; 1st August 2011 at 22:30.
if the gauges are the same style i will have both £25 delivered howmuh for the dump valve aswell
Sorry Jack, Puntowhoopwhoop was on the Gauges/Pod and EBC like a tramp on chips lol.
So gauges/pod/ebc provisionally sold with deposit and marked up.
yeah i was lol
Intersted in the apexi filter
Also the afr gauge does this not require a separate lambda then? Ie this can be wired into what you have and get an accurate reading?
That is what i was thinking vern
Anyone can use a AFR gauge but unless on full throttle you wont get an accurate reading, you would need to use a wideband lambda sensor for a true reading
How much for the top boost to the netherlands?
Ill be ok then always on full throttle