WMS 4-pot brake kits

[shorty2289]

feck knows then i had gt pads in 156 calipers a few months ago when trying to make my own big brake kit for the rear i might still do it its just the disks that were the stumbling block for me and then brake bias issues too

[GT3turbo]

Not that ime upgrading the rears ....... Yet.

But why not use a 2 piston rear caliper?

Adi

[Keri-WMS]

But why not use a 2 piston rear caliper?

No handbrake!

[GT3turbo]

What do evo's and the like use then?

Adi

[shorty2289]

evo's have a drum brake on the rear as well as the brembo caliper
all mitsubishi's have a non integral hand brake

[cragterharris]

Is there no way to make a bracket from the normal caliper place and mount brembos on the rear and if possible use a second caliper for the handbrake?

[Keri-WMS]

It's possible but not at all easy, we do have a small WMS 2-pot that's ideal but the handbrake part tends to be a nightmare.... (heavy and expensive)

[jack-de]

i have a coupe 20vt will these fit and are they narrower the brembos?

[Keri-WMS]

I've got a Coupe 20vt hub and wheel etc to work with and am planning a (front) kit for it, but it's not ready yet...the front kit for the 16vt is aready done.

[IHI]

257mm would suit both 300 and 284mm front application with no big issues on brake bias. (my choice for now)

276 would only suit 300mm front application..