Wilwood Dynalite 4pot Caliper Set Up

[Ashy C]

These are now surplus to requirements as i am going down a different route car wise.

These are one of the lightest set ups available, and offer 4 Pot stopping power at 5KG lighter per standard.

Here is how the compare weight wise to standard and brembo set ups
http://www.puntosports.co.uk/forums/...&postcount=581

The sale includes:

2 x Wilwood Dynalite calipers with brake lines
2 x Wilwood Bells
2 x Wilwood 300mm rotars
2 x Brackets to fit the to a PGT HUB
And wilwood fast pads in the calipers

In great condition here are a few pics

Asking for £300 Delievered, some sold not so long back for £450!!!











Any questions PM me many thanks!

[Ashy C]

Bump £300

[minimaniac]

Is it me, or does it look like the actual pad is not making full contact with the disc?

[GT3turbo]

yea,

Looks like you need to have the disks skimmed or new ones.

Adi

[Ashy C]

Nah they where working spot on, just been in the garage stacked up rusting up nicely

[minimaniac]

Not trying to ruin you sale. Looks like the pads arent having full contact even when on the car, Cant be put down to rust.

[dangt]

How much are new disks and pads for these and where do you get them from?

[Ashy C]

Rally designs and most good stockists

[dru1989]

whats the length from the center of the hub to furthest part of the calliper if you had it all set up on the car. trying to work out if it would fit under 15" wheels

[mikesalt]

whats the length from the center of the hub to furthest part of the calliper if you had it all set up on the car. trying to work out if it would fit under 15" wheels

Superman Dan has fit these under 15" Compomotive alloys which looked great it was so tight. If you go onto the Wilwood website, there are reference tables for each caliper that define the outer clearance radius for each size of disc. 300mm is 11.75 inches for referencing the tables.