induction kit & exhaust for a 1.6 punto

[seaneyb]

pahhh well thats no good lol

still need an exhaust mine is knackered!!!

[seaneyb]

(((

[sicskate]

what induction kit is that? also where does the breather pipe attach too?

its an original 1.6 kn kit on a gt top boostpipe.

[seaneyb]

righto ok, i dont think k&n do a 1.6 i just checked they just do a panel filter. How about a gt induction kit on a boost pipe, will that work?

[MasterAuron]

Absolutely any filter will work boss. Just needs to have the right size neck to fit on the end of the boost pipe OR you'll need to sort out some sort of reducer. I have that same filter and a GT boost pipe lying around. That filter does not fit straight on the end, hence another piece of piping has been used to expand to the filter (in the picture above).

Don't think you will find a filter small enough to fit straight onto the boost pipe. In fact, I'd bet me left bollock on it.

RE the breather pipe; either get a little filter to vent it straight to atmos (can be an MOT failure depending on tester), run it back into the GT boost pipe/induction piping, or get a catch tank.

[seaneyb]

RE the breather pipe; either get a little filter to vent it straight to atmos (can be an MOT failure depending on tester), run it back into the GT boost pipe/induction piping, or get a catch tank.

one of these do the trick dude?

http://www.halfords.com/webapp/wcs/s...egoryId_165660


ah ok with regards to the boost pipe can i just not use the standard pipe that connects to the air filter. Also got to think about the mas sensor too.


So i need a gt to boost pipe a gt induction kit and a reducer pipe, where can i get a reducer pipe from?

[gibbopuntomad21]

www.autoperformance.co.uk do reducers i have a top boost pipe somewhere