Nothing special about GT arms apart from the ABS hole.
Are they the same on all mk1s or do GTs have specific trailing arms to allow the clappers to fit?
I ask as while stripping my beam down some of the ARB bolts just snapped straight off, and looking at them i had may aswell buy some new ones.
Any ideas on price from Fiat or general RRP from auto factors?
Also, same with front wishbones please???
CHAIRS
Nothing special about GT arms apart from the ABS hole.
1997 Fiat Punto GT Abarth - being restored
2014 Jaguar XFR-S Sportbrake
mine were around £48 each i think mate and as chris says only difference is the abs hole
Can the std arm not be modified to hold the abs sensor?
I don't think so.
1997 Fiat Punto GT Abarth - being restored
2014 Jaguar XFR-S Sportbrake
I was think something like a blob of cast weld then tamp it?
Views?
all front arms are the same, rear arms are diffrent, as said have abs sensor holes
Could'nt you just replace the bush's in yours alot cheaper,just done Sarah's on the cab auto factors wanted 35quid a side.Also they wanted 70 for the gt yeah right.
I beleive Dan is ditching the ABS so dan you can use and trailing arm.
I fitted calipers to my lower spec arms no probs.
You can drill holes in the non abs arms
However if you ditching the abs it wont matter so you can go for the cheaper arms or rear bush kits are about £25 for both sides.