WMS 4-pot brake kits

[Keri-WMS]

As a reference the hub I have used to build the kit on is from either a 1998 GT Turbo or 1999/2000 Sporting, so is a MK1, and the hub>mount lugs (on hub, for caliper) offset is 46.35mm.

Do any of the Mk2 / 3 hubs vary from this does anyone know?

[sh00ks]

I measured the requested offset.

If I'm correct this would be the measurement you looked for



We made an alternate measurment, from wich we thougth it couldn't be the wanted one, but just to be sure



Also used your 1:1 drawing in the innerrim



I hope we did it right

[Keri-WMS]

We made an alternate measurment, from wich we thougth it couldn't be the wanted one, but just to be sure

I hope we did it right

Nearly!!!

You are correct here on the hub, but that's the wrong side of the caliper-mount-lug....you need the "wheel side", and as if the heat shield isn't there.

Or measure from the hub to the heat-shield and ADD 1mm for the shield (they have all been 1mm thick I've found).

Let me know if you want a quick drawing!

The wheel looks ideal, loads of room!

[Keri-WMS]

Here's the one I mean! :-)

[karting]

keri do you do any form of kit for a RX7 FD3S?

[Keri-WMS]

keri do you do any form of kit for a RX7 FD3S?

Not yet, but we're always happy to have a look at new / custom kits...

[sh00ks]

[Keri-WMS]

Still odd those images!

[sh00ks]

Better?

[Keri-WMS]

Better?

I can only see the bottom one, the other one is still a [X] - can anyone else see them all ok?