some drag racing

[punt0urbo]

http://video.google.com/videoplay?do...23748436280653

mad fiat x1/9 around 700bhp....

the tipo at the srtart of the video has a bad clach.....

[hobizoli]

X1/9: [ame="http://www.youtube.com/watch?v=Oq_b_VZH0oc"]YouTube - Fiat X1/9 drag[/ame]

[Mr Hans]

700hp seems a bit dubius. A 700hp punto can do 9.5s quarters, and the x19 is lighter, being of that power it wouldve annhiliated everything, especially being just just over 900kg in standard forum. 450hp looks more likely - thats what I'd expect from one doing high 10s quarters.

[hobizoli]

700hp seems a bit dubius. A 700hp punto can do 9.5s quarters, and the x19 is lighter, being of that power it wouldve annhiliated everything, especially being just just over 900kg in standard forum. 450hp looks more likely - thats what I'd expect from one doing high 10s quarters.

The black x1/9: http://www.timeslip.hu/reszletes.php...4&mp=13&kg=800

[Mr Hans]

Whats the power?

There was an x19 with the alfa V6 in the back in the UK, I have a video of it doing the hill climb. It was 220hp and it recorded on 0-100km.h in 3.9s!

[hobizoli]

Whats the power?

There was an x19 with the alfa V6 in the back in the UK, I have a video of it doing the hill climb. It was 220hp and it recorded on 0-100km.h in 3.9s!

The green line on the diagramm means the power on the wheels, so 220-230WHP, and that is 280HP on the flywheel. After a ~week this measuring is was tuned up about 20-30HPs, so on the video it is around 300HP on flywheel.

It has forged pistons, but stock conrods. Can You any firm that sells 4340 conrods for this 1.6 DOHC engine? As we know, the Integrale's aren't good.

[Mr Hans]

Fiat 500 47.14 18 132.000 20.825 16.000 5/16 UNF 2 £384.00 + VAT
Lancia Integrale 4X4 Turbo 53.91 22 145.000 25.705 25.705 3/8 UNF 4 £768.00 + VAT

Is all I can see.

[MiniMike]

****ing banger

[hobizoli]

Fiat 500 47.14 18 132.000 20.825 16.000 5/16 UNF 2 £384.00 + VAT
Lancia Integrale 4X4 Turbo 53.91 22 145.000 25.705 25.705 3/8 UNF 4 £768.00 + VAT

Is all I can see.

Well...

Integrale 4x4 is 2.0 (84x90 (bore/stroke))
Ritmo 105TC is 1.6 (84x71.5)

But...as we know, the 1.6 engine has ~1.5-2cm smaller high. We have never seen on the internet 1 firm that sells for this 1.6 enigne 4340 rods. Why? IMHO it is the same. With the shorter(71.5 stroke) crank the same conrod comes at TDP so high in this smaller 1.6 block, as it with the Integrale's 90mm stroke and higher block

Am i think it right?

[Mr Hans]

****ing banger

These cars have the same bottom end and head as your car, makes yours as much a banger