Reply With Quotethat's like 2.0 bar just to make sure you all come out with 170+Originally Posted by Lord_Grishnack
love you james
sebbers, dont forget to run proper boost this time.
that's like 2.0 bar just to make sure you all come out with 170+
love you james
Can tell us what boost we should be running to get the claimed 170bhp? GT1 and GT3 boost figures would be good as the GT3 cant run as much I presume?
1.2 bar on the bleed valve, I've seen it written down many times. But don't know which GT mark it's for.
Lets try and keep this to facts rather than guesses bum. Im running 20 psi although my cam is nackered which explains my low reading. But most ran 1.2 bar or over for the RR yet still didnt get near the expected 170bhp for the full SEB0 and SEB2 setup.
The commonality with a lot is aged engines that the power drops over time with wear and tear.
Also 1.2bar is duration and NOT overboost, some of the RR were 1bar duration with 1.2 overboost.
For 170hp you need a good engine and 1.35bar on a gt1/2 needing decat exhaust, air filter.
There are a few runs of seb0 making near 180hp from the past 3 years.
1) PuntoBaz.NE
2) Punto85
3) Ticki
4) Kierenm
5) hgt paul
6) Smiddy_04
7) KAS
8) Olman
9) bum
10)JaY
11)
12)
if the cars back an runnin sweet, ill be there, camshaft, decat an all!
yeah count me in,fianlly got stuff sorted(i think!)
1) PuntoBaz.NE
2) Punto85
3) Ticki
4) Kierenm
5) hgt paul
6) Smiddy_04
7) KAS
8) Olman
9) bum
10) JaY
11) Stuuyh
12)
one to go......
What time is kick off?
I'll get myself over there but wont take the last place as i'm not sure whether i'll put in on the rollers yet. Probably will do if there is still a place or if someone drops out
Posting Permissions