-
23rd April 2005, 00:00
#41
Thinking of using a base frame then placing angled frames which will be MDF covered and retrimed.
Not sure if this will sound good and not sure with fibreglass
Going to have to go for a similar look to that one......so cool!!!
-
23rd April 2005, 14:28
#42
Punto Lover
i've been thinking about doing some custom speaker pods so i can fit comp's up front, but i'm not too sure about using fibreglass, it's a bit like papier mache isn't it?? knock toghether a quick mdf frame, whack some moulding fabric down, slop some resin on, then put the glass sheet on and resin it up, keep going, a quick layer of filler, then sand it like a mother****er, and paint??
-
23rd April 2005, 20:02
#43
my temp build
http://ryan.mattstone.net/build.bmp
its a 10inch pioneer, gonna b replaced with a 15inch RE soon
-
23rd April 2005, 20:06
#44
Are those computer fans by the sub?
-
24th April 2005, 17:20
#45
Another Picture of psxprince install
-
24th April 2005, 20:19
#46
Found this on ebay !!! I think its ace!!!
Install on Ebay
-
24th April 2005, 20:29
#47
Just to clear some confussion on the mot. The spare wheel doesn't come into the mot and wouldn't/shouldn't get failed on it. (Otherwise you are being ripped off) The Reasion the mot tester looks in the boot is to check for rust and any holes. If for some reasion the mot tester can't get to this. Say you have a big old install in the way, The tester does have the right to refuse to test the car.
-
24th April 2005, 21:46
#48
Heres a pic of my install
-
24th April 2005, 23:33
#49
Punto know it all
Thats new isnt it Plummer ???.Didnt see it in the feature you had in Revs or fast car ??.
Like the lines of it .
What you got running there?
Antony
-
24th April 2005, 23:48
#50
1/4 mile at a time
yeh didnt notice that at bluewater either plummer, looks gd mate! they infinity subs i spot? wot amp you got running them?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules