Reply With QuoteDoes this come with the matching shims, and is it all shimmed up quietly ?
Here i am selling a complete top end for the mk1 GT;-
Piper 270 fast road cam - all lobes are A1 minimal wear that i can see. all 8 still very "pointy"
matching carrier box that this cam ran in. carrier bearings arent scored and look decent. cam spins nicely in the carriers with no binding. followers have been kept in sync so that the wear matches the lobes and the valves clearances shouldnt be far out at all on reassembly so it all matches as best as possible.
Piper cams vernier pulley. great condition. can include the old timing belt used if required. think it was a Gates.
GT3 cylinder head - no cracks. Fitted with matching Piper valve springs.
cambox comes with the rocker cover and oil filler cap. gasket is still in place and didnt leak.
some odd nuts and bolts might be missing. i will supply what i recovered.
the cam end cover gasket is still in ok condition and will probably be fine to reuse but you might want to fit a new one to be 100% safe.
looking for £250 ovno the lot, cash on collection preferred/but paypals an option. maybe able to drop the parts off or halfway meet, depending on distance (at cost of fuel).
PM me or email stuart.clarke@blueyonder.co.uk
Last edited by clarkster; 14th September 2013 at 17:47.
Does this come with the matching shims, and is it all shimmed up quietly ?
yeah but every cam box needs the gaps checking after torqueing down. they wont be far out though from when this lot was all on the car.
as above shims and followers all in correct order.
Head sold.
Looking for £160 collected for the Piper cam and springs etc.
Add £10 for delivery.
piper cam now sold.
Posting Permissions