Reply With Quotelearn how to start goodOriginally Posted by TAOUXIS
whats your 60feet times?
ok good look and game on
learn how to start good
whats your 60feet times?
I tell you since one year raise your RPM!!!how the hell. iv got 312bhp and cant get under 13 with lsd etc etc
You have an excellent setup!
Understand that hobor everytime tries to make in low rpm much as possible torque! You go complete another way -> Big Turbo with low cc.
Go to 8500 - 9000rpm and then you hit low 12 seconds
Your engine is ready to see sometimes 9000rpm and be sure , nothing will happen
no, andre, we use the same car on the streets to drive to work and home, and for evrywhere as with we going to drag racesI tell you since one year raise your RPM!!!
You have an excellent setup!
Understand that hobor everytime tries to make in low rpm much as possible torque! You go complete another way -> Big Turbo with low cc.
Go to 8500 - 9000rpm and then you hit low 12 seconds
Your engine is ready to see sometimes 9000rpm and be sure , nothing will happen
on the streets this "under 5k rpm the car is dead, but on drag runs very good" configuration is a nightmare, we must have low rpm torque too on the streets
over 7500rpms the 2nd and 3rd gear synchro goes out very quickly, and it is hard to shift
further the yellow also was revved to 8000-8200, but it has the 5th gearbox in 4 years
my 60 ft is 2.1. i know andre but you seen my power graph and power drops after 6750. i can retard the cam a bit and that would help a bit, maybe 7250 so no point to rev past 7750 8000 really with my setup
Hi mate!
Then make this. I´m sure 500rpm more and you hit 12.8 / 12.9. Or another cam. I know a guy in brasil who make a cam which make Power to 8700rpm. He use this cam for his 1.8l with GT40.
The video is a bit older but its one these cams. I will ask for his gearbox modification!
http://www.youtube.com/watch?v=Vt2I9...eature=related
My idea: With your MS set Gear 1 and 2 to 7500rpm and gear 3 (if possible) to 8000rpm.
In which gear you cross the targetline? Maybe its the problem you must shift short before thius line and loose time? Try to set the rpm level that you cross the targetline short before the limiter.
Regards
Andre
Last edited by TurboAndre; 22nd August 2012 at 11:08.
Wow complicated stuff haha who's goin to this trax next month ? Is it a big event or ... thinkin of goin with a friend in his GT3 see.
Thanks scott
i know how to improve a fair bit, i have 23psi wastegate. i need to remove a spring and run 8 psi. then with avcr make second gear 15 psi then 3rd 25psi
It's the bootleg dragstrip in Hungarylol
erm will these help my traction
Posting Permissions
