Page 17 of 21 FirstFirst ... 712131415161718192021 LastLast
Results 161 to 170 of 205

Thread: Evo VI GSR

  1. #161
    Street racing whore! Vern's Avatar
    Join Date
    Oct 2004
    Location
    East sussex
    Posts
    5,632
    Fitted my new double din tonight, borred of the single din kenwood so in with the new.






    Also cleaned and painted my rad surround as it was chipped and rusty


  2. #162
    Street racing whore! Vern's Avatar
    Join Date
    Oct 2004
    Location
    East sussex
    Posts
    5,632
    More work over the weekend, fitted my HKS coilovers plus a few engine bits and bobs to tidy her up a little plus went for an MOT!

    1st job was to address the crap idle and sudden stalling issue, turns out was a gunked up ICV so removed and cleaned up with carb cleaner and all good, perfect tick over and no cutting out now



    Coil overs next up, think it was over due.





    and the crusty fronts changed over...



    Better




    Then off for a hassle free MOT




    The bay with some blingy bits





    Next up after the new alloys turn up is to fit new discs and pads all round, re-locate the battery and fit a hard intake turbo to AFM pipe plus so much more

  3. #163
    Punto Sports Club Member Damosan's Avatar
    Join Date
    Oct 2009
    Location
    Eastbourne
    Posts
    1,822
    Awesomeee

  4. #164
    Lifeless Geek - need to get out more! Todd's Avatar
    Join Date
    Jan 2008
    Location
    Dartford
    Posts
    11,562
    Good to see you finally giving this the attention it deserves.

    Sent from my GT-I9505 using Tapatalk

  5. #165
    Loves a bit o' boost! WilkyWay's Avatar
    Join Date
    Feb 2004
    Location
    Durham NE
    Posts
    10,082
    Looks mega.

  6. #166
    Street racing whore! Vern's Avatar
    Join Date
    Oct 2004
    Location
    East sussex
    Posts
    5,632
    Tinted my front lights and indicators with a light smoke film, came out ok i think.

    Currently measuring us pipe work for a hard pipe from turbo to AFM so i can move the battery/air filter.

    So lights.....


  7. #167
    Punto Sports Club Member Damosan's Avatar
    Join Date
    Oct 2009
    Location
    Eastbourne
    Posts
    1,822
    Was looking sweet when i came over mate!

  8. #168
    Street racing whore! Vern's Avatar
    Join Date
    Oct 2004
    Location
    East sussex
    Posts
    5,632
    Quote Originally Posted by Damosan View Post
    Was looking sweet when i came over mate!
    Cheers my man

    Hope to pick up my carbon dipped oil cooler vent this week too.

  9. #169
    Street racing whore! Vern's Avatar
    Join Date
    Oct 2004
    Location
    East sussex
    Posts
    5,632
    Currently building my turbo to AFM pipe, so ive drilled and tapped a thread in the metal intake pipe to allow the oem boost controller to remain plumbed in until i fit my 3 port jobbie.

    So far....


  10. #170
    Punto Enthusiast
    Join Date
    Feb 2014
    Location
    United Kingdom
    Posts
    114
    Lights look great, how hard was the film to do and what film did you use? Want to do top 3/4 of my rear lights and my fogs. Used tint spray on my side repeaters but the finish on yours looks much nicer

Page 17 of 21 FirstFirst ... 712131415161718192021 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •