Not many sold as spares/repairs these days!
Good luck!
EDIT: I have spark now, but it still wont start!
Fuel, Spark, wont fire = bored me
I have given up, and going to sell it on.
1996 Punto GT2, 125k on clock, full service history up to 119k
No tax or MOT. been off the road since December 2010.
I got this car with the engine in bits in the boot, with a turbo blown and piston rings need changing. I did all of that and put it back together, it wouldnt start, had no spark. I changed a few things and still having the same problem, so I have decided that I am going to pass it on and be done with it.
I have changed:
New rings
New shells
good used turbo unit with not a single bit of play in it.
New coil pack
New crank sensor
New Cambelt kit
New Head gasket
Bodywork looks in good shape, roof laquer is a bit dull. Alloys with good rear tyres, fronts have little wear on insides. but more than legal limit over 3/4 of tread.
Would need to be towed or trailored away.
Would like to get £500 as thats what owes me (little more to be fair) but I know I prob wont get it so offers welcome.
Last edited by darthcrab; 9th September 2011 at 10:49.
Not many sold as spares/repairs these days!
Good luck!
You still have no spark or no fuel?
More pics please.
i'll put some more pics up first thing. Anything inparticular or just a few more? was raining hard when I took those so was quick.
No spark and no fuel, although I believe the fuel is down to a nakerd fuel pump.
Whats the rust situation?
Pics of the inner rear arches and inner sills by the front seats would be awesome.
are the inner/outer arches rusted. has it been welded. cheers
Drivers front: This is chipped paint, with little bit of rust just starting
The rest of the arch is clean
Drivers rear: Small bubble under paint, about an inch long by cm high by back bumper. the inner arch itself looks good.
The rest of the arch is fine
Passenger rear: Paint chipped at the bottom, but not rusty, just untidy.
rest of arch is fine
Passenger front: in good nick. couldnt see anything
The roof: I am not sure if this will tcut out or will need some more doing, I havent event attempted.
doesnt look like its been welded, and arches not in bad condition at all.