Reply With Quotetidyed up the links for you mate.
Shout up when you want it moved to for sale section.
FOR SALE £2200 NO OFFERS! JUST GOT A S3!
engine mods!!!!!! IM NEAR YORK AREA!
stand alone dta e48
head--fully gas flowed and portd big vave heads
kent fast road cam and ajdustabe pully
bottem end- forge pistons i have a bill for forged rods but superman has told me they are standerd but they are still ok evan if they are!
l/balanced flyweel l/balanced crank
turbo technics stage 2 turbo with forge act!
fmic
sks samco kit
all renewd vac pipes
c20let injectors
uprated potr head gasket and head bolts
uprated fuel pump
f.s.e
full scorp exhaust sytem sounds unreall on boost!
boost gauge and oil presh gauge
apexi turbo timer
lowerd on g-max shocks and srings
strut brase
team dynamic alloys
full respray
there will be loads more but this is just of top of my head! I have reciepts for everything to prove all the mods!
[IMG]http://img219.imageshack.us/img219/7442/puntoweel1.jpg
[/IMG]
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by mjjgt; 19th May 2011 at 12:59.
tidyed up the links for you mate.
Shout up when you want it moved to for sale section.
ye thanks pal!Originally Posted by mawbster
Price??
What's the output brav?
10 or 12mm headbolts?
10mm and the car has 3 maps saved to a memory stick 16 psi 161bhp 19 psi 181bhp 25psi 214bhp but thinking of runin 28 psi(spoke to turbotechnics they say it would be fine!) would help the sale with a bit more power for the sake of 130quid abut in to minds to sell it thats why i have put it up see if i get any intrest in it!
Seems low power fror the spec dont run 28 psi
ye those last maps was done when i had a few problems inlet gasket was leaking actuator was f**ckd and crank sensea wa on its way out but went 70 miles to get it maped so he just did his best!i am probs going to get it maped again as i have put a new turbo on which will defo c more power!
Last edited by mjjgt; 7th May 2011 at 20:47.
Mapped on standalone with an FSE are you nuts???? The whole point of the standalone is you just fit larger injectors and don't need an FSE.
i know pal i dont have a standerd reg but it was running standerd injectors last time it wa mapd but i keeped the 180bhp map on coz at 214bhp the injectors are at 100% cycle which would make it lean out! ! now its got c20let 1s in!
Posting Permissions