Reply With Quoteso is it missing on 2 & 3 or one of them?
2/3
just had the car washed, now the cars running lumpy
i took the plugs out and dried them all with a airline still no joy,
ive noticed that 2/3 cylinders are not sparking at all i can remove the lead wilst running and it does not even die or hesitate, if i remove 1/4 the car dies or sometimes runs worse
what else can this be possibly coil,ht leads, etc.etc.
so is it missing on 2 & 3 or one of them?
ta Todd yer its missing on 2 and 3 but not 1 and 4 ,, i notice that the coil-pack 2/3 position is at the top could this be part of a fail
quite possibly. Remove the spark plugs and check the spark. remember a missfire can be caused by lack of spark or fuel
yer Todd held all plugs 1 by 1 to a earth point (chassis) and 2+3 no spark mate
but loads on 1+4 even a inch away
ok, thats a start then. TBH i think coil pack broken down is a fair bet then
are you running standard leads?
Yer standard leads too
standard leads are renowned for breaking down too. But as above the symptoms you are describing, would point at coil pack IMO
As i thought lol anyone got one
Would be worth swapping a lead from 1or4 with 2or3 before buying parts.
