Went over to the car at weekend to start bolting few bits on. Bolted mani and turbo on, but found my stainless elbow was cracked so ordered another and turned up this morning
Will get over probably Thursday night and stick the elbow on, then the exhaust side is done.
Also made a start on inlet side but was missing 2 oil cooler pipes and 2 rubber seals that seat the fuel rail into the bottom inlet section
So not much achieved but better than nothing
Also offered my new brakes up to the standard rims lol
Hopefully won't be long now
Originally Posted by ToddGT
Brakes turned up, they're fooking massive compared to the Nissan oem brakes lol
Thats because thery're from a proper performance car Yoff
When i changed my calipers recently, i knew they were big, but in your hands they are proper fecking hyodge!
Will stop the 200 nicely!! Do they work ok with the 200s ABS and master cylinder according to others Todd?
Todd are they 330? I can't see on iPhone but they look the sane as the callipers I got
Gutted won't get to see this! Must admit slightly tempted to get a 200 in oz if I can't find a pulsar or nice r32.
CT9A Evo's have 330mm fronts and 300mm rears.
Wicked! I have a set sitting in my boxthe discs weight a ton!!
I measured mine at 320mm.
nice brakes there toddjust need the matching one for the rear now
Yeah I'm gonna ask dan if he'll make adapter kit to fit the rears, otherwise it's gonna have to be z33's.
Also collected this from srb power today
Once cut the middle bit from my front bumper, will look like this fitted, make a bit of a feature of the fmic
oh nice. cant wait for you to get back on the road now mate.
drove mine for the first time in about 5 months on saturday. scared the s**t out of me was definatley over 400bhp. the colder weather and a fixed boost leak ment i was running 1.6bar instead of 1.4bar. oops better turn the boost down a tad me thinks. was like a ****ing rocket though
might be at the essex sxoc meet this week if ur going?
I might go mate, fancy picking me up
Posting Permissions
