My dads UNO has CR 9,2:1 with 95 octane and 1,4bar we have around 11 degree ignition in maximum - knock free, checked with knock tool.
Printable View
My dads UNO has CR 9,2:1 with 95 octane and 1,4bar we have around 11 degree ignition in maximum - knock free, checked with knock tool.
Hy my name is Ergin.
I come from Germany. Went through the manual of DR_EVIL assembled my Megasquirt.
Have Tested everything with JimStim and it works.
Today I have it installed in my Punto GT3.
Unfortunately, I have not brought it to start.
It sounds as if it would start. I tried the set on cranking PW.
Engine Specs
Running MS1 Extra
1372cc GT3 Standard Rods, Pistons, Crank, Block
Standartd Punto GT Injectors (226 @ 3Bar)
63,5mm Downpipe and exhaust
Mitsu Turbo
Standard Punto GT3 compression ratio
Are these setting, at tuner studio, correct?
Mainly the red marked.
http://www.abload.de/thumb/settings2ujq2.jpg
Thanks and Sorry for my English,
Ergin
Original Düsen haben 240cc.
Wo kommst du her? Irgendwo hab ich auch ne MSQ für GT Düsen denke ich.
Dr_Evils Drag Slag
Modifications
Stroker Crank
H Beam Rods
Hayabusa Forged Pistons
81mm Block
Lightened Flywheel
EvIL Ported Head
2.5" Boost pipes
63mm Audi s2 throttle
EvIL Side Mount Tubular Manifold
EvIL 3" Downpipe and Exhaust
Newman Race Cam
GT2871r Turbo
38mm External Wastegate
Megasquirt MS2 Engine Management
CG Motorsport Paddle Clutch
OMP Uprated clutch cover
http://i164.photobucket.com/albums/u...ps9506372c.jpg
http://i164.photobucket.com/albums/u...psff8ef12e.jpg
http://i164.photobucket.com/albums/u...psdc11b0b7.jpg
Awesome.