-
Ms2 Punto GT Settings
MS2 Basic settings
These are all for Tunerstudio http://www.efianalytics.com/TunerStudio/
This is where you set up the trigger wheel etc. The required fuel depends on your injector size and fuel pressure.
http://i164.photobucket.com/albums/u...S2settings.jpg
MS2 Cranking and Idle settings
I have spent many cold mornings getting these settings perfect for my car
http://i164.photobucket.com/albums/u...S2Cranking.jpg
http://i164.photobucket.com/albums/u...2Cranking2.jpg
http://i164.photobucket.com/albums/u...2Cranking3.jpg
http://i164.photobucket.com/albums/u...MS2pwmduty.jpg
The basic curve above should be allmost perfect, Move all settings up or down to alter your idle speed.
Acceleration enrichment
I use a large throttle so this might need reducing on your car
http://i164.photobucket.com/albums/u...t/MS2accel.jpg
Spark Table
To be used at your own risk! I spent many hours building this using 2d maps extracted from an Uno Turbo ECU, I have removed up to 5 degrees of timing at anything over .5 bar boost to make sure it is a safe starting point.
My GT likes to idle on about 7 degrees timing and 12.5 to 13:1 Air Fuel Ratio
http://i164.photobucket.com/albums/u.../MS2timing.jpg
Ve Table
This is mine but every engine will require different amounts of fuel depending on timing used etc.
http://i164.photobucket.com/albums/u...rt/MS2fuel.jpg
-
-
Prime pulse everybody in the MS forum has 0.1 (only to push the fuel pump relay).
Here some ignition datas from FIAT:
http://www.crengineering.de/bin/gall..._microplex.pdf
-
Post to make the thread show up.