One off custom Dr Evil Elbow and Downpipe

Printable View

10th January 2010, 11:40
birdraceruk

One off custom Dr Evil Elbow and Downpipe

For sale is a custom one off Elbow and Downpipe made by Dr Evil. This as far as I know is the only one he has made and is manufactured to divert air from the wastegate away from the exhaust gas at the elbow to allow a smoother air flow. It comes complete with lambda mounting hole, if you are wanting to run a wideband its worth bearing in mind that the Innovate kit can support wide and narrow with just the one sensor.

http://www.raceready.co.uk/sale/elbow1.JPG

http://www.raceready.co.uk/sale/elbow2.JPG

http://www.raceready.co.uk/sale/elbow3.JPG

http://www.raceready.co.uk/sale/elbow4.JPG

http://www.raceready.co.uk/sale/elbow5.JPG

Item is currently fitted to the car and the photos are from before fitting so it won't look as shiny but is still in full working order. Due to be removed from the car very shortly once the weather clears.

Looking for £200 plus postage.
10th January 2010, 11:59
DR_EVIL

Bargain, I wont ever be making another one of these, If i wasn't side mounting my turbo this is what id be using on my own car.
10th January 2010, 12:11
Todd

wicked piece of kit, complete bargain for someone here
10th January 2010, 12:14
sicskate

Why r u selling?
10th January 2010, 13:09
HEATHY

Is it ok to fit on a standard IHI/Garrett?
10th January 2010, 13:24
Todd

pete is the best person to ask but if memory serves, the IHI only has 4 studs and i think but dont quote, only 3 of them line up with the t2/t25/t28 exhaust flange pattern.

Hope this helps
10th January 2010, 13:33
gazza-blackpool

looks like a monster piece of equipment:)
10th January 2010, 14:34
dru1989

pm sent
10th January 2010, 15:47
DR_EVIL

Only 3 studs will line up on an IHI, This would be a waste as it is made to fit a GT25r or 28R perfectly, the holes and divider are all made to fit an GT25/28r and might not line up.
10th January 2010, 16:10
HEATHY

Ahh cool am I right in thinking just the normal Evil elbow fits the IHI then?
10th January 2010, 19:44
birdraceruk

Quote:

Originally Posted by DR_EVIL

Only 3 studs will line up on an IHI, This would be a waste as it is made to fit a GT25r or 28R perfectly, the holes and divider are all made to fit an GT25/28r and might not line up.

My bad I should have included this in the for sale post.

All PM's have been replied to.
10th January 2010, 20:14
DR_EVIL

Quote:

Originally Posted by HEATHY

Ahh cool am I right in thinking just the normal Evil elbow fits the IHI then?

Yes, fits both.
12th January 2010, 07:23
birdraceruk

Deposit taken 8-)