Yer there clearly is a conflict.Originally Posted by xploitGT
So I am loosing 5/6psi from the engine to the guages I have in bar and psi!?
Strange bit worrying.
there is a conflict between your/our vac pipe and boost gauge and is not giving an accurate reading on the boost gauge but is far better than the standard one.Originally Posted by RussGT
he takes out the boost pipe in the engine and reads it form there.
XploitGT
Yer there clearly is a conflict.Originally Posted by xploitGT
So I am loosing 5/6psi from the engine to the guages I have in bar and psi!?
Strange bit worrying.
Originally Posted by x16pjr
yeh we will go there then! not to far to travel!
no i wouldnt say that its just you get peak boost for instance and through the rev range you loose pressure.Originally Posted by RussGT
i.e you will defo hit 20psi but buy the time you change gear it will be only about 16psi.
i think thats right.
XploitGT
Oh yer I realise that but on the print out it peaked at 16psi at 2k rpm then dropped.Originally Posted by xploitGT
He done the testing in 5th gear so ther was no gear change??
Soo that figure that I got was inaccurate for what it should be running.
Ohh I dont know..