a cone filter allows the chirruping noise through on a recirc.
a cone filter allows the chirruping noise through on a recirc.
It's not a GT but the Evo chirps unless it's a dump after some full throttle, the spring is very strong so doesn't open during normal driving, the Evo drives alot nice off boost than a GT does though.
The Mint used to chirp for the same reason using a Collins.
whats up with the standard recirc unit. loving mine for months now
Smooth Silver GT conversion Project: http://www.puntosports.co.uk/forums/...ad.php?t=72046
Arden GT2 Project:http://www.puntosports.co.uk/forums/...ad.php?t=91148
Project Reshell and perfect:http://puntosports.co.uk/forums/showthread.php?t=110197
i have panel filter and it chirps. Sounds the tits
Cheers for the response guys, quite fancy the recirc so may hold up for one to come up cheap first unless i have an amazing offer on an atmospheric.
Two years ago Dods and I ran the HKS set up on recirc. Could ask for a better set-up IMO. Held boost spot on,let go when you wanted it to and sounded the nuts.
Sqeeeeeeeeeeeeek Squeeeeeeeeeeeeek
^^^^^best option
Billy did you turn the valve round like I said.
My forge recirc plumbed opposite to standard so that the pressure comes round from the boost pipe into the bottom of the valve and out the side into the intake
http://www.youtube.com/watch?v=unJfRl3ngTE&feature=youtube_gdata_player
The valve should always be pushing against the boost, not be pressed down by it.
If it is being pressed down by it you have it on the wrong way around!
Adi
Well I spoke to forge directly and was told it will operate both ways round