Reply With QuoteTake the battery tray out and you'll see this on the top of the box,
Undo the nut and gear selector cable (just pops off) slide the shaft out to clean it up, it should be a nice loose fit. Don't grease/oil it else the gearstick will be sloppy.
Hoping someone can help me...
My HGT has been off the road for about 3 months... long story..... now got the car back but gear changing is very stiff from 1st to 2nd and 2nd down to 1st.. I know DanHGT does a how to guide on sorting out the stiff gear change... but unfortunately there are no pics as to what I should be looking at...
Just wondered if anyone has some pics on what I should be looking at...
Thanks in advance
Timmo69
Take the battery tray out and you'll see this on the top of the box,
Undo the nut and gear selector cable (just pops off) slide the shaft out to clean it up, it should be a nice loose fit. Don't grease/oil it else the gearstick will be sloppy.
Just wanna say a big thanks to Bob... that sorted the prob out... now feels like a new car.... thanks again
bob? lol, cheque in the post I hope
Posting Permissions
