-
3rd January 2013, 22:25
#1
Punto Lover
any one else had to do this
i have just fitted brembos to my gt off a coupe 20vt and got the conversion bracket but it seems that wheel spacers are needed to fit my coupe 20vt wheels does this sound right ?
-
3rd January 2013, 23:43
#2
I know you need spacers for some wheels as i have them on mine. But i didn't think you needed them for coupe wheels?
Are they catching on the caliper?
-
3rd January 2013, 23:51
#3
Punto Lover
-
4th January 2013, 00:10
#4
All I needed was the bracket to hold the brembo to the hub and that's it I didn't need no spacers to fit my 20v wheels
-
4th January 2013, 10:12
#5
Punto Lover
I'll have to have another look today cheers
-
4th January 2013, 11:25
#6
Sounds like cheap half arsed brackets then, that only space the caliper and not its offset.
-
4th January 2013, 11:47
#7
Punto know it all
If the calipers fit over the disc properly they should not catch a 20vt alloy?
Assuming the caliper is on the correct disc properly the bracket should be fine but there shouldn't be any fouling with the alloy.
-
4th January 2013, 12:42
#8
Are the rubbing on both sides?
Are they rubbing on the back of the spokes?
You could have a buckle in the centre of the alloy?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules