Results 1 to 4 of 4

Thread: Ms2 Punto GT Settings

  1. #1
    PSC Trader DR_EVIL's Avatar
    Join Date
    Jul 2003
    Location
    Middlesbrough
    Posts
    3,385

    Ms2 Punto GT Settings

    MS2 Basic settings

    These are all for Tunerstudio http://www.efianalytics.com/TunerStudio/

    This is where you set up the trigger wheel etc. The required fuel depends on your injector size and fuel pressure.



    MS2 Cranking and Idle settings

    I have spent many cold mornings getting these settings perfect for my car









    The basic curve above should be allmost perfect, Move all settings up or down to alter your idle speed.


    Acceleration enrichment


    I use a large throttle so this might need reducing on your car



    Spark Table

    To be used at your own risk! I spent many hours building this using 2d maps extracted from an Uno Turbo ECU, I have removed up to 5 degrees of timing at anything over .5 bar boost to make sure it is a safe starting point.

    My GT likes to idle on about 7 degrees timing and 12.5 to 13:1 Air Fuel Ratio



    Ve Table

    This is mine but every engine will require different amounts of fuel depending on timing used etc.

    Last edited by DR_EVIL; 6th October 2011 at 14:09.

  2. #2
    Super Mario Superman's Avatar
    Join Date
    May 2005
    Location
    Nottingham/Leeds
    Posts
    25,959
    Nice one Pete!

  3. #3
    Punto Enthusiast
    Join Date
    Jun 2007
    Location
    Schipkau
    Posts
    372
    Prime pulse everybody in the MS forum has 0.1 (only to push the fuel pump relay).
    Here some ignition datas from FIAT:
    http://www.crengineering.de/bin/gall..._microplex.pdf

  4. #4
    PSC Trader DR_EVIL's Avatar
    Join Date
    Jul 2003
    Location
    Middlesbrough
    Posts
    3,385
    Post to make the thread show up.

Similar Threads

  1. Urgent need ms2
    By andy b in forum Car Parts Wanted
    Replies: 4
    Last Post: 18th April 2011, 21:35
  2. Torque settings for punto GT and sporting mk1
    By sxh71 in forum Punto Chat
    Replies: 2
    Last Post: 2nd November 2010, 03:29
  3. punto mk2 cam timing/torque settings and sequence for cylinder head bolts
    By mike 777 in forum 8v Models Engine and Exhaust
    Replies: 2
    Last Post: 31st December 2009, 23:43
  4. Torque settings punto gt.
    By andy b in forum Turbocharged Models Engine and Exhaust
    Replies: 1
    Last Post: 4th January 2009, 14:35
  5. Grande Punto Wheel torque settings
    By squirrel in forum Wheels, Tyres, Suspension and Brakes
    Replies: 2
    Last Post: 27th December 2007, 15:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •