MS2 Basic settings
These are all for Tunerstudio http://www.efianalytics.com/TunerStudio/
This is where you set up the trigger wheel etc. The required fuel depends on your injector size and fuel pressure.
MS2 Cranking and Idle settings
I have spent many cold mornings getting these settings perfect for my car
The basic curve above should be allmost perfect, Move all settings up or down to alter your idle speed.
Acceleration enrichment
I use a large throttle so this might need reducing on your car
Spark Table
To be used at your own risk! I spent many hours building this using 2d maps extracted from an Uno Turbo ECU, I have removed up to 5 degrees of timing at anything over .5 bar boost to make sure it is a safe starting point.
My GT likes to idle on about 7 degrees timing and 12.5 to 13:1 Air Fuel Ratio
Ve Table
This is mine but every engine will require different amounts of fuel depending on timing used etc.