Reply With QuoteYou need to modfy your firmware according to the resistances of the air and water temperature sensors you use.Originally Posted by TurboPilot
Hey Adi, this is the firmware am using with the CLT & IAT sensors for Bosch, decided to upload it.
Firmware is 029y4
<a href=''http://hotfile.com/dl/95570917/6f4b460/msns-extra.zip.html"> Download</a>
You need to modfy your firmware according to the resistances of the air and water temperature sensors you use.
Project Thread
---> Add Your Puntos Here Please <---
http://www.torquestats.com/hall_of_fame/Fiat/Punto+GT
According to Easytherm the ones burnt are the correct sensors for Bosch. Which ones do you use?
I used the water temperature values from Autodata and the air ones that came with my open element sensor.
Project Thread
---> Add Your Puntos Here Please <---
http://www.torquestats.com/hall_of_fame/Fiat/Punto+GT
Any chance of the values?
Adi
For standard sensors
Coolant degrees C
0 - 6000
20 - 2600
40 - 1100
80 - 320
100 - 200
Air Inlet Degrees C
0 - 6000
20 - 2600
40 - 1100
Project Thread
---> Add Your Puntos Here Please <---
http://www.torquestats.com/hall_of_fame/Fiat/Punto+GT
Where do you input the above? As Easytherm only lets you put three figures per sensor.
Did you change the Bias Resistor value?
Adi
For standard sensors
Coolant degrees C
0 - 6000
40 - 1100
100 - 200
Air Inlet Degrees C
0 - 6000
20 - 2600
40 - 1100
Project Thread
---> Add Your Puntos Here Please <---
http://www.torquestats.com/hall_of_fame/Fiat/Punto+GT
Yea, sorry ignor the red boxes, its just a random screenshot of the program!
Adi
Posting Permissions
