I thought I'd do the first "how to" guide for this section, and have chosen the engine bay as this is something most of you are all interested in. Showing your under bonnet bling off

This is a quick 5min guide..

Tools required:

* Pressure Washer
* Foil or Cling Film
* Degreaser or APC
* Detailing Brushes
* Trim Protectant

So, you start with your dirty engine bay and you cover all electrical connections with either tin foil (best) or some sort of cling film..





Then you spray the engine in degreaser or as I used here in this picture, all purpose cleaner. Once you've done that, you agitate all the wet areas with various brushes to help remove the dirt..



Once this process has been carried out, at a shallow angle, pressure wash the engine bay ensuring all degreaser/APC is rinsed off. When you have carried out this process, allow the engine to idle for 5-10mins to help with the drying process..

Then, once dry, apply your choice of trim protectant. And the result?

Voila:






Any questions, just ask.

Matt.