Reply With QuoteNone, you need the correct amount of fuel not more fuel.
hi my mate has given me a set of pug gti6 injectors (270 cc) would the be a direct fit to the gt? what kind of gains would i get if any, im running seb2-fmic-stage1 tt hybrid- 14psi atm
None, you need the correct amount of fuel not more fuel.
you'd also have to buy a fuel pressure regualor to make the 260cc's work.Originally Posted by FCP
but more impotantly.. you don't need injectors this size with your set up.
and 14 psi? running 1 bar of boost. why?
ive only had the car a few days im new to this
14psi is what the wastegate must be set at as it aint got any bleed valves or any as yet
but still pulls well i do have a bleed valve but read bad things about them
0.8 is the wastegate, the pierburg valve should 1.2 bar.
i think you should turn the boost up, your running slower than a standard GT with that boost pressure lol
bleed valves are only used to increase the boost pressure when using a seb chip becuase if you use the periburge valve it wont boosts past 0.5 bar and they are fine, i had one for 7 months and zero problems. although a better manual boost controller would be a dawes device and even better, use an electronic boost controller.
hope this helps.
cheers sorted it now put it up to 18psi seem to pull alot better now, im going to look into this dawes device
Posting Permissions