dont supose youd sell the 15mm spacers seperate would you??
SOLD
Complete brembo brake setup.
Moving away from punto so have a few parts I don’t need.
With this sale u get
1 set of brembo callipers recently had a full refurb.
Almost new pads (about 150 miles)
Very good condition disc’s
Braided brake pipes
A choice of either
10 mm hubcentric spacers (oe fiat) or
15 mm hubcentric spacers
all u need to fit these is fluid & a couple of bolts & an hour or so.
o yes & the all important brackets
The callipers have a few scrape marks on the where I tried a few different sets of wheels.
All in all very good upgrade.
£320 + delivery
Last edited by scott9951; 26th November 2009 at 22:42. Reason: sold
dont supose youd sell the 15mm spacers seperate would you??
you cud try pm'ing me an offer
be tempted u cud have a punto that stops in time for xmas lol
Hey-up lad! I was born in Rochdale and lived there up until my mid-teens. Could I ask you what the section of the tyres is and what's the lowering on the Punt? I've recently acquired a set of (I think) 7.5J x 16" OZ Ultraleggerras to fit some 45-section GSD3s and I'm not sure if 50mm at the front and rear would be too much. Your pic. shows the kind of effect that I'm looking for.
sorry to hear u lived in rochdale lol
section of the tyres?
i cant remember the drop its bilstein sprintline shocks & springs 0r sportline whichever costs the most.
You mean tyre profile
You should be okay with 16's and a 50mm drop. I had the same combo on my old old sporting with no trouble
Thanks for that Mags. I initially looked for 40 profile tyres in a 195 section, but there's no really good choices there, so it looks like 195+ / 45 will be best, I just have to work out a section that won't put the speedo out too far ( <10% ) and will offer some protection to the rims against kerbing.