just bought a Collins dump valve but had to swap the main spring with the standard forge yellow spring, the standard spring in the Collins was so strong it wouldn't even open the piston at idle, anyone else had this problem.
Printable View
just bought a Collins dump valve but had to swap the main spring with the standard forge yellow spring, the standard spring in the Collins was so strong it wouldn't even open the piston at idle, anyone else had this problem.
Thats the idea of the springs mate, you adjust them to suit your particular car deffo not un-heard of.
even on full boost it took about a second after lifting off before dumping half the air had gone back over the turbo, just as well I had a spare spring that fit perfectly
I tried a Collins a few years ago, couldn't get on with it, the 'dump' was too short so didn't sound great. Went back to the DV26
DV26 is the gayest sounding DV ever though.
Collins are for big boost setups and it always was the better DV, bullet proof unlike the Baileys or Forge units people used back then.
Sounds like you've maybe got something plumbed in wrong or an air leak if its taking a second for it to dump,it should be straight away and thorough.
The Bailey's are a bit sneezy like :lol:
I love the sound of the Forge DVs, the only sound better than them is compressor stall :p You're right about quality of the Forge DVs, they need a rebuild after about 40k miles...
Not had any experience with the Collins so will have to take your word on their bulletproofness!
i made a vid of mine the other day but still cant load the fecker up.......saying its too large to upload to you tube.
Where can i get collins dv springs then?
I used a yellow spring out of the forge that's fits perfectly, u can order springs separately of the forge website
http://www.forgemotorsport.co.uk/con...duct=FMDVSU110
ignore the psi ratings as I used a green spring in the forge and it holds boost perfectly, the spring I got in the Collins standard was more like the red spring, it was really hard to compress by hand
Hks is my favourite those Tial ones are meant to be good as well
Sent from my GT-I9505 using Tapatalk
Tial won't work with an AFM.
I had an HKS one too in the past, worked really well but the noise is even gayer than a DV26 and it goes off with hardly any boost, which is the point of it.
Conventional DV are meant to be hard to compress.
Oh didn't know that about Tial good to know as I was thinking of maybe getting one in the future. My hks is an older version sounds better than my mates new version his sounds like it's sneezing!!