MK1 Shell - Good base of track weapon, some prep work done
o.k. People just trying to see if there is any interest in my shell, which I started prepin from my project track car.
For those who don't know about what I started and what work has been done, you should look at my old project thread which contains photos and a little walk throu what I have done:
http://www.puntosports.co.uk/forums/...ight=red+devil
- Car is total stripped in side
- All the sound deadening crap has been removed
- Floor plans were cleaned up (inside & out) could do with a bit of a sproose up
- What little rust the shell had was treated (only bit was near the filler neck brackets see project thread)
- A fresh coat of under seal applied to the underneath to protect it
- The front windscreen will need replacing as it has been cracked
- The left hand side rear has a minor dent as per this pic:
http://i248.photobucket.com/albums/g...l/DSCF0287.jpg - The front suspenstion leg mounting points have been strenghtend with a thick wedge of steel. Although they could do with being cleaned up a bit now as they have rusted a little bit.
- The rear housing/arches inside have had a thick plate of steel wealded for mounting rear legs of a roll cage, as per MSA blue book spec.
- Other points in the shell have been prepared ready for cage mounting points.
The shell is a good base for anyone wanting to build a good track car or anything to be used for all things fun.
Cosmetically it doesnt look too hot,the body work is not perfect as it has a few dings and paint is faided, that never bothered me as it was going to be finished with a fresh paint job inside out but the shell is very good with vertually no rust.
The main things is that the shell is very very good base condition for such a project to be built from, I also belive it spend a good time out in malta which is a nice hot & dry place which is why isnt rotten like some found over here.
Currently I am just looking to see if any one is interested in the shell only as a lot of work has gone into prepin it and I think it would be a shame to scrap it and lose out on all the time, money and effort that I put into it so far.
So the bare shell with REG & V5 Log book is on offer.
If I can't sell the shell then everything will go into storage for me to come back to in later years. If I sell the shell then many other goodies for building a big spec Punto will be up for grabs including the roll cage with extra bars ect
If anyone is interested in a bit of a package deal such as a rolling shell with F&R refurbed subframes ect or with the roll cage then talk to me.
Please PM me or email andyc@xlerate.net if interested
price wise... I really do not know but I am open to offers to see what people are thinking they would pay for it.